|
|
 |
Kingfisher
| Fibre Identifier/Attenuator Testers
|
| A visual fault finder is used as an optical
fibre fault finder, fibre optic continuity tester, and cable
fault locater over moderate distances. Our visible fault locater
uses the more effective 635 nm wavelength. All Kingfisher fibre
optics continuity testers comply with the safety requirements
for Class 2 laser devices |
|
|
 |
KI
7010 Variable Optical Attenuator
The KI 7010 Variable Optical Attenuator is a precision handheld
variable attenuator commonly used for optical margin testing
on optical fibre networks.
• Automated attenuator sequencing
for high optical margin testing
• High accuracy attenuator with
excellent ORL, PDL and PMD
• Very low wavelength sensitivity
suitable for CWDM testing
• Easy to use attenuators with >200hr
battery life
• +30 dBm input power capability & remote control
freeware
• Single mode or multimode attenuator options |
|
|
|
Two-Way
LTS and Return Loss Meter, KI 7340
These are the industry's fastest and easiest to use Loss Test
Sets displaying bi-directional average loss and Return Loss
(ORL) in real time. They can be used as a source & meter,
tone generator / detector or high performance ORL meter.
• Multimode / single mode options
• Up to 4 (lës)
source wavelengths on one port NEW
• CWDM source wavelength
options NEW
• 2 % meter accuracy & over 22 calibrated wavelengths
NEW
• Autotest real time display of average bi-directional loss
and ORL
• KITS® reporting and record keeping package. |
|
|
|
Optical
Talk Set, KI 020
Our fibre optic talk set provides full duplex voice communication
over a single optical fibre. A fibre optic talk set is used
during installation, commissioning & repair, In situations
where other communications systems are inconvenient.
• Easy
to use, reliable, field proven talksets
• 50 dB range over one
single mode optical fibre
• Built-in speaker phone for higher
productivity
• Multi-party capability via clip-on probe
• All
talk sets are identical, so no A/B matching problems |
|
|
|
Clip
On Identifier, KI 6150
A clip on fault locater is used to identify live fibres or to
detect tones generated by a source, or as a route locater.
•
Easy to use with one hand
• Active display of traffic or tone
direction
• Interchangeable heads for 250 µ fibres or
3 mm patch leads
• Practical live fibre detector due to low
insertion loss
• Low false detection rate
• Uses popular 9 volt
battery size. Auto turn-off |
|
|
 |
|
