|
|
 |
Loop
Telecom | IP Access
|
|
The IP family of products' mission is to mediate between
the Ubiquitous Ethernet port that has become the de facto
universal Data transfer interface and the bandwidth available
on the Wide Area, whether it be PDH or SDH access digital
lines or whether it be the analogue subscriber LOOP.
Its purpose is to offer the widest possible choice of Ethernet
connectivity through the different physical 'pipes' offered
by carriers starting from the subscriber loop or CAT 3 cable
plant, to E3/DS3 via (fractional) E1 or bonding of multiple
E1s
|
|
|
 |
IP
6100, High Speed Ethernet Access (EIU)
Loop-IP6100 High Speed Ethernet Interface provides connectivity
from high speed 100 Base-T full duplex Ethernet to either DS3
or E3 networks. Loop-IP 6100 also support alarm relay.
High Speed Ethernet Access (EIU)
• 100 Base-T full duplex Ethernet
in accordance with
• IEEE 802.3u via 1 RJ45 port
•
Interfaces to a standard DS3/E3
• Data rate of 45/34 Mbps (DS3/E3)
• Status and diagnostics LEDs with built-in self-test algorithm
• Alarm Relay & Password management for telnet Supports
VLAN (no VLAN processing) & MPLS (Multi Protocol Label Switching)
transparency Supports Auto Negotiation & IPX transparency |
|
|
|
IP
V6610 High Speed Ethernet Access Mux.
The Loop-IP 6610 E1/T1-Router/Bridge provides connectivity from
10/100 BaseT LAN to E1/T1 WAN. The unit support DB9S console
port, allowing users in-service diagnostics and fault isolation
via local or remote terminal and telnet via Ethernet port.The
unit also provides multicolor LED indicators on the front panel
and ACO (Alarm Cut-Off) button.
• Support 1 LAN ports
• Support
1 E1/T1 WAN port
• Support built-in 4-port Ethernet switch function
(Optional)
• Support 10/100 BaseT speed auto-sensing and half/
full duplex auto-negotiation.
• Support Router or Bridge mode |
|
|
|
IP
6440, IP I-MUX
The Loop-IP 6440 IP Inverse Mux provides connectivity from 10/100
BaseT LAN to E1 WAN through multiple E1, up to 4 E1 links. Loop-IP
6440 also provides bridging function from Ethernet to E1 links.
This unit can provide customers from 2Mbps to 8Mbps network
bandwidth. Loop-IP6440 offers automatic E1 channel failure detection
and can re-assign the number of E1 channels for transport of
Ethernet traffic. For example, if there are 4 E1s configured
for 10/100 Ethernet traffic transport, and one E1 fails during
the service, the other 3 picks up the entire load. This minimises
loss of IP packets. |
|
|
|
IP 6234 IP-DSLAM
The Loop IP-DSLAM (Digital Subscriber Line Access Multiple)
is a compact managed, standalone IP DSLAM with layer 2 switching
capability. The wire-speed switching and full VLAN supporting,
both port-based and tagged-based, are the key to make the Loop
IP-DSLAM more distinguished than any other. With the uplink
2 Ethernet port and 24 ports XDSL interfaces, including ADSL,
ADSL+, ADSL2+ and SHDSL, the Loop IP-DSLAM is suitable for MDU,
MTU, Campus, and remote access applications with the reach of
up to 6km
• Compact intelligent IP-DSLAM
with layer-2 switch capability
• Two Ethernet Uplink ports,
and 24 xDSL user ports per box
• 8 Ethernet user ports are
optionally available at the cost of 8 xDSL user ports
• xDSL options including ADSL,
ADSL+, ADSL2+ and G.SHDSL |
|
|
 |
|
