|
The IP family of products' mission is to mediate between the Ubiquitous Ethernet port that has become the de facto universal Data transfer interface and the bandwidth available on the Wide Area, whether it be PDH or SDH access digital lines or whether it be the analogue subscriber LOOP. Its purpose is to offer the widest possible choice of Ethernet connectivity through the different physical 'pipes' offered by carriers starting from the subscriber loop or CAT 3 cable plant, to E3/DS3 via (fractional) E1 or bonding of multiple E1s |
|
| IP 6100,
High Speed Ethernet Access (EIU) Loop-IP6100 High Speed Ethernet Interface provides connectivity from high speed 100 Base-T full duplex Ethernet to either DS3 or E3 networks. Loop-IP 6100 also support alarm relay. High Speed Ethernet Access (EIU) • 100 Base-T full duplex Ethernet in accordance with • IEEE 802.3u via 1 RJ45 port • Interfaces to a standard DS3/E3 • Data rate of 45/34 Mbps (DS3/E3) • Status and diagnostics LEDs with built-in self-test algorithm • Alarm Relay & Password management for telnet Supports VLAN (no VLAN processing) & MPLS (Multi Protocol Label Switching) transparency Supports Auto Negotiation & IPX transparency |
|
| IP V6610
High Speed Ethernet Access Mux. The Loop-IP 6610 E1/T1-Router/Bridge provides connectivity from 10/100 BaseT LAN to E1/T1 WAN. The unit support DB9S console port, allowing users in-service diagnostics and fault isolation via local or remote terminal and telnet via Ethernet port.The unit also provides multicolor LED indicators on the front panel and ACO (Alarm Cut-Off) button. • Support 1 LAN ports • Support 1 E1/T1 WAN port • Support built-in 4-port Ethernet switch function (Optional) • Support 10/100 BaseT speed auto-sensing and half/ full duplex auto-negotiation. • Support Router or Bridge mode |
|
| IP 6440,
IP I-MUX The Loop-IP 6440 IP Inverse Mux provides connectivity from 10/100 BaseT LAN to E1 WAN through multiple E1, up to 4 E1 links. Loop-IP 6440 also provides bridging function from Ethernet to E1 links. This unit can provide customers from 2Mbps to 8Mbps network bandwidth. Loop-IP6440 offers automatic E1 channel failure detection and can re-assign the number of E1 channels for transport of Ethernet traffic. For example, if there are 4 E1s configured for 10/100 Ethernet traffic transport, and one E1 fails during the service, the other 3 picks up the entire load. This minimises loss of IP packets. |
|
| IP 6234
IP-DSLAM The Loop IP-DSLAM (Digital Subscriber Line Access Multiple) is a compact managed, standalone IP DSLAM with layer 2 switching capability. The wire-speed switching and full VLAN supporting, both port-based and tagged-based, are the key to make the Loop IP-DSLAM more distinguished than any other. With the uplink 2 Ethernet port and 24 ports XDSL interfaces, including ADSL, ADSL+, ADSL2+ and SHDSL, the Loop IP-DSLAM is suitable for MDU, MTU, Campus, and remote access applications with the reach of up to 6km • Compact intelligent IP-DSLAM with layer-2 switch capability • Two Ethernet Uplink ports, and 24 xDSL user ports per box • 8 Ethernet user ports are optionally available at the cost of 8 xDSL user ports • xDSL options including ADSL, ADSL+, ADSL2+ and G.SHDSL |
|
