|
|
 |
PanDatel
| Ethernet & IP Products
|
|
ET-CG Ethernet converters are flexible universal solutions
for the integration of Gigabit networks with broadband IP
backbone systems. These devices support all three Ethernet
bandwidths 10/100/1000 Mbps. Therefore, they are applicable
for all types of Ethernet systems and solutions, and as such
represent safe investment options for clients.
The integration of these devices in existing network architectures
is easily done through the functions of integrated VT100 or
SNMP management systems via rack agents. Additional functions
and tests are available for such solutions.
|
|
|
 |
Ethernet
Converters (ET-CG) + (ET-CES 10/100)
• Data rate 10/100/1000Mbps in Half or Full
Duplex mode
• Interface: 10BaseT, 10/100/1000Base Tx, (RJ-45)
• Line: 1000BaseSX & LX GBIC
• Transmission distance up
to 70 km
• Management via VT100, SNMP (PAGRIS)
• 19" rack
mount card (3U) or standalone unit
• Optional link pass through
and remote fault detection |
|
|
|
Ethernet
Converters (ET-CM)
• Data rate 100 Mbps
• Interface: 100Base Tx, (RJ-45)
• Line:
850/1300 nm Multimode or 1300/1550nm Singlemode
• Transmission
distance up to 80km
• WDM option for single fibre operation
• Central Management System VT100, SNMP(PAGRIS)
• 19" rack
mount card (3U) or standalone unit
• Integrated link pass through
and remote fault detection |
|
|
|
COP-FE,
TDM Multiplexer for IP & MPLS
• Extends 4 data interfaces plus two Ethernet
LAN interfaces over Packet Switched Networks (PSN)
• Supports
Ethernet, IP, MPLS and VLAN based networks
• Completely protocol
transparent for TDM streams
• Daisy-Chain via Ethernet port
(higher port density)
• Supports double VLAN tagging and VLAN-tagging
to 802.1q
• Transparent for customer VLAN-tags by double VLAN
tagging
• External clock interface for 2MHz reference clocking
|
|
|
|
IPV
Mux. (IP multiplexer for voice & data)
• Protocol Transparent, E1/T1 (G.703/4),
RS530, V.35, X.21
• Data rates 56/64 Kbps up to 4 x 1.544/2Mbps,
10/100BaseT/FL
• MDI/MDI-X, Telnet, VT100 & SNMP management
• 2 x 10/100 BaseT interfaces to connect to the IP networks
• May be cascaded to increase the number of serial interface
ports
• Optional single mode or multi mode fibre up-link, WDM
option |
|
|
 |
|
