|
|
 |
PanDatel
| Access Multiplexers
|
|
Fibre optic multiplexers used for bundling signals and then
transmitting these signals via optical fibre lines, and access
multiplexers capable of transmitting a number of different
bandwidths along a single copper line.
|
|
|
 |
Fibre
Multiplexer (S-MUX 155Mbps)
The S-MUX 155 integrates point-to-point topologies via an optional
fibre line or via SDH/SONET networks. A web browser allows additional
solutions facilitating easy operation, configuration, maintenance,
error detection and remote management of the entire network.
• Optical 5 channel STM-1/OC-3c Multiplexer
into SDH networks
• Simultaneous voice and data transmission
• 4xE1/T1 and 1x10/100 BaseT over 1300nm Singlemode
• Web based
management and integrated test facilities
• n x 64Kb Bandwidth
management
• Transmission distance up to 100km |
|
|
|
Fibre
Multiplexer (FME-M & S)
• FME-S, Optical 4-Channel Multiplexer
• Data rates:
4 x 2.048 Mbps (E1), 4 x 1.544 Mbps (T1)
• Interface: G.703
(RJ-45, BNC)
• Line: 850/1300nm Multimode, 1310/1550nm Singlemode
• Transmission distance: up to 90 km
• FME-M, Optical 16-Channel
Multiplexer
• Data rates: up to 6 x 2.048Mb, G.703 or 4
• Interface:
X.21, V.35, V.36, 10BaseT, BRI
• Line: 850/1300nm Multimode
or 1310/1550nm Singlemode
• Transmission distance: up to 90
km |
|
|
|
Copper
Multiplexer (INAX)
INAX-CV is a highly flexible Mux. Operating at data transmission
rates of n x 64 kbps (up to 1984 kbps) and equipped with the
following interface slots: G.703, X.21, V.24, V.35, V.36, 10BaseT,
BRI (ISDN-S0), UK0 and DB-25 or RJ45 connectors. On the line
interface, the following options may be selected and configured:
G.703, G.704 (E1) or fibre-optic multimode / singlemode with
BNC, RJ45, SC, FC-PC, ST connectors.
• INAX, 2 & 4-Channel
Access Multiplexer
• Data rate: n x 64 kbps or max.1984 kbps,
Line: G.703/G704, E1, BNC or RJ45
• Transmission distance: up
to 2 km
• Central Management System /SNMP available |
|
|
|
Copper
Multiplexers (EMUX-F, G & M)
• EMUX-F, Optical 16-Channel Multiplexer
• Data rate:
16 x 2Mbps (E1), 16 x 1.544 Mbps (T1)
• Interface: G.703 (RJ-45,
BNC optional)
• Line: 1300nm Multimode or 1310/1550nm Singlemode
• Transmission distance up to 90 km
• EMUX-G, E3, 16-Channel
Multiplexer
• Data rate: 16 x 2Mbps (E1), 16 x 1.544 Mbps (T1)
• Interface: G.703 (RJ-45, BNC optional), Line: E3, HDB3 (G.703),
BNC
• EMUX-M, Optical 16 or 23Channel E1 Multiplexer
• Data
rate: 16 or 23 x 2Mbps (E1)
• Interface: 10Base T Bridge, 4
x(7port x E1) or RS530
• Line: E3 (BNC), Multimode 1300, Singlemode
1310/1550nm
• Transmission distance up to 50/100km |
|
|
 |
|
